Image is a representation, actual product may vary.

8203 COIL/BALLAST Kit

MSD IGNITION | Part# MSD-8203

Out of Stock (call for availability)

Ignition Coil - Blaster 2 - Canister - Oil - 0.700 Ohm - Female Socket - 45000v - Ballast Resister / 90 Degree Boot / Terminal Included - Red - Kit

$64.99

Product Overview

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application. Mallory Unilite applications also require the ballast resistor.

Features:

· Improved output coil for stock points or electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series

· Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)

· 100:1 turns ratio and lower primary resistance produce high voltage output

· MSD Red metal canister is filled with a premium grade oil for cooling

· CARB E.O. Approved

Categorized under:
· Ignitions and Electrical » Ignition Components » Ignition Coils